The Peavey Penta(R) is a single-channel tube amplifier with five totally different personalities, courtesy its five selectable EQ/gain voicings. The Penta amplifier combines four matched EL34 tubes with four 12AX7 tubes and features ceramic tube sockets, custom transformers, ultra-high quality components and 140 watts into 16, 8 or 4 ohms. A product of extensive tube amplifier engineering, the Penta is a completely straightforward, classic guitar amp. Correction: five guitar amps. Using 100% analog Pentatone(TM) circuitry, this uniquely Peavey amplifier gives the guitar-playing world its take on five classic gain voicings on a single amp channel. These sounds are identified by corresponding icons and are accessible by a rotary knob. No fancy footswitches allowed, and no shimmering effects included—the Penta is for true plug & play guitar fanatics. The Penta's "Star" icon reveals a classic British plexi voicing, while the "Bull" icon produces a modified British voicing with tons of added gain and a tighter low end. The "Tree" setting is, simply put, fat and clean, while the "Mudflap Girl" setting is a super-high gain voicing with a more responsive EQ and power amp section. The "Cactus" icon lays on a thicker British voicing with a loose attack and slightly more gain.
140 watts (rms) into 16, 8, or 4 ohms (switchable)
The Vypyr® 30 Head features 24 amp channel models-two channels of 12 popular amps for the first time anywhere-plus 11 editable preamp "stop Box" effects and 11 editable post-amp "rack" effects with dual-parameter control. With twice the processing power, models and effects of competitive modeling amplifiers, the Vypyr Series dramatically redefines the power and scope of modern guitar amplification. Vypyr amplifiers are built on powerful 32-bit, floating-point SHARC processor that enable vastly enhanced flexibility and features than ever before available in guitar amplification.
- 24 amp models - Three band EQ, master volume and pre- and post-gain controls - 11 editable rack effects - 11 editable stomp-box effects - Up to 5 effects simultaneously with optional Sanpera™ II footswitch - Onboard chromatic tuner - Onboard looper with optional Sanpera™ I or II footswitch - 12 programmable presets, plus up to 400 presets with optional Sanpera™ II footswitch - Tap tempo - Studio-quality headphone output - Patented TransTube® technology in preamp and power amp - WYSIWYG (What You See Is What You Get) interface - 30 watts into 8 ohms - Weight Unpacked: 17.20 lb(7.8 kg) - Weight Packed: 20.28 lb(9.2 kg) - Width Packed: 12"(30.48 cm) - Height Packed: 22.5"(57.15 cm) - Depth Packed: 11.125"(28.2575 cm)
The new Rumble™ 150 Head boasts a very conservative 150 watts (comparable to many competitors' class D products rated at 200 or 300 watts) and delivers powerful tone and full features in a portable package. Dial in the right amount of overdrive for your sound and then blend it with your clean tone using built-in "stomp-box" style controls (switchable with optional footswitch). Powerful, stylish and easy to operate, the Rumble 150 gives you high-quality bass tone and professional features at an unbeatable value.
General
Model Name:
Rumble™ 150 Head
Series:
Rumble™
Amplifier Type:
Solid state pre-amp with efficient class "D" power amp
Color / MSRP* / Part # :
Black $399.99 231-5800-020
Electronics
Voltage:
120V 2315800020
Wattage:
150 Watts @ 4 Ohms 2315800020
Effects Loop:
Balanced effects loop
Inputs:
One 1/4" Input with -6db Pad Switch
Auxiliary Input:
Auxilliary RCA Input for CD/MP3 Player, Drum Machine, etc.
Full featured, professionally voiced pre-amp, High effiiciency digital power amplifier, quiet, variable speed fan cooling, OVERDRIVE effect with GAIN and BLEND controls, Optimized for bass to give mellow warmth or heavy distorted tones, PUNCH & SCOOP preset EQ shapes for finger and slap style tones, 4-Band Active EQ, Delta Comp™ Adaptive Compression Circuitry, XLR LINE OUT for direct recording or live use, Effects Loop (balanced for noise-free connections), Headphone Jack
Accessories
FootSwitch:
Sold separately: Overdrive On/Off, P/N 0994052000 or P/N 0994054000 (Vintage Style)
The MG100HFX amp head packs fully analog tone circuits, providing the distinctive Marshall tone and pure organic flexibility. Using digitally controlled analog functions, the MG4 Series MG100HFX also delivers precise control and superb flexibility without masking your guitar's own sound or making your tone sound processed and artificial.
The Marshall MG100HFX head also features a frequency-dependent damping circuit. This circuit ensures that the sound reproduces the same interaction between amplifier and speaker that occurs in professional valve amplification, making the MG100HFX amplifier sound and feel alive.
A 2-button footswitch is included, but with a Stompware 4-button footcontroller (not included), you can easily store and recall your favorite settings, playing seamlessly through your music in true professional style.
Marshall MG4 Series MG100HFX 100W Guitar Amplifier Head Features:
Power: 100W RMS
Channels: 4
Stompware footswitchable (not included)
EQ: 3-stage
Damping: FDD onboard and additional 2-way selector
The Marshall Haze MHZ15 tube guitar amp head is brimming with 15W of power, iconic looks, and most of all, exemplary Marshall tone. This compact all-tube head features effects, reverb, and classic looks that won't take up your living room's entire floor.
The Haze is covered in a vintage-style vinyl and fitted with protective corners. The hand-stretched baffle fretcloth, with its white piping finish, matches the complementing Haze cabinets, meaning you can combine it with 1 or 2 of them to create one cool-looking mid-sized stack.
Just because the Marshall Haze head is smaller than a standard tube head doesn't mean that it's quiet or lacking in power or tone that you expect from a Marshall amp—its 15W of all tube power guarantees you the full Marshall experience.
The tube amp head is driven by an ECC83 preamp stage and 6V6 power amp, combining to create fantastic tube tone that belies its stature.
The Haze 15 has both normal and overdrive channels with a shared EQ and onboard effects, providing a versatile sound set and delivering an all tube tone in a compact package that performs just like an all tube amplifier should.
Designed in the same style as our traditional Marshall Head amplifiers, the 2 distinctive footswitchable channels of the 15W Haze amplifier offers a variety of tonal possibilities. The normal mode has bags of headroom and provides a rich and organic clean sound.
In the overdrive channel the Haze amp head delivers a warm overdriven tone, and its separate Gain control makes it possible to dial in preamp drive, distorting your tone before it reaches the power stage and delivering a more gritty rock tone.
There is a bright switch which is shared between both the normal and overdrive channels. When engaged the bright switch really lifts the overall sound achieved adding extra bite and sparkle and defining the edge of your tone when you need it.
Both the normal and overdrive channels use a shared 3-band EQ, allowing you to individually adjust the treble, middle, and bass response or the amplifier to suit your taste.
The effects section of the Haze 15 contains custom-voiced effects and reverb that have been specially designed by Marshall to compliment the feel and tone of the amplifier. Each effect selected on the channel will be remembered when you return to the channel, meaning you can set up your clean and overdrive sounds and return to them over and over again without having to readjust your settings. The warm emulated spring reverb has its own independent control, allowing you to add as much or as little reverb as required. For those who want to completely remove the reverb circuitry from the equation, the reverb control is fitted with a positive off switch, so by rotating the control counter-clockwise you can feel the control click indicating that the reverb circuitry is disengaged.
The 3 selectable effects in the Haze 15 reflect the overall feel of the tone available and have been designed to work with the tone of the amplifier to ensure that every one feels rich and satisfying.
Effects are selected using the front panel effects button and indicated by the color of the LED. Green indicates that Echo effect is selected, orange shows that Vibe is selected, and Red indicates Chorus. By using the effect level control you can determine just how much of the effect you want in your sound.
This amp head is simple to use, and its familiar layout means that you won't have to spend forever figuring out how to use it. Every Marshall Haze 15 is supplied with its own 2-way footswitch, so you don't have to use the front panel to change channels or switch the effects on or off, simply stomp your preferences like a true pro.
Marshall Haze MHZ15 15W Tube Guitar Amp Head Features:
15W of all-tube power
Compact design for great tone that doesn't take up a lot of space
Vintage-style looks and construction
ECC83 preamp stage, 6V6 power amp
Normal and Overdrive channels with shared EQ
Emulated spring reverb Onboard effects: Echo, Chorus, and Vibe
